America Standard Touch Panel Controller Dimmer Wall Switch 12V-24V For Single Color Led Light

Product Specifications

NAME: Low-voltage Touch Panel Dimmer (America standard)

MODEL: KW-TM06U

Summarization

Touch panel dimmer is a new high-end dimmer which newly developed by our company. It adopts glass panel design, is beautiful and fashionable in appearance. It adopts high precision capacitance touch control chip, increases the touch sensitivity, reduces trigger which caused by mistake. It is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, panel lights etc., it has many advantages such as convenient to connect, easy to use and others.

● Touch Panel Color: White/Black

● Working temperature: -20-60 ℃

● Supply voltage: DC12~24V

● Output voltage: DC12~24V

● Output: 1 channel

● Connection mode: common anode

● External dimension: L74 Χ W120 Χ H41.8mm

● Packing size: L145 Χ W99 Χ H53 mm

● Net weight: 150.2g

● Gross weight: 207.6g

● Static power consumption: <1W

● Output current: <8A

● Output power: 12V<96W, 24V<192W

External Dimension

Unit: mm

Interface Specifications

3 and 4: power input, input voltage range: 12-24V, 3 for positive, 4 for negative.

1 and 2: power output, output voltage is 12-24V, Max output current is 8A, 2 for positive, 1 for negative.

Instruction:

: adjust brightness 0-255 quickly, up to 50 touch points.

: turn on/off dimmer at any state; when in an open state, long press the button more than 3 seconds to open or close the output of the buzzer.

: reduce static brightness, 255 grades.

: increase static brightness, 255 grades.

Typical Application

Installation Method

1. gently pry gaps in touch panel with a screwdriver, and then you can slowly remove the panel, as shown below;

2. Wiring

Connect wiring according to typical application. Refer to typical application;

3. Install switch base

As shown in the picture, mount the controller on the cassette in the wall after connecting the wire, and then nail the screw, fix it on the wall, finally you can install the switch pedestal on the wall;

4. Close touch panel

Look at the direction of touch panel, and then closed the touch panel.

Remarks:

1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;

2. The supply voltage of controller ranges in DC12V~DC24V, it may burn out the controller once exceed the voltage ranges.

Packing List

• 1 x America Standard Touch Panel Controller Dimmer Wall Switch 12V-24V
• 1 x User Manual

5 stars  , August 7, 2013
Erland.Burnand
The shipping and packaging was very good and arrived within time. Recommend