Integration Remote Controller Dimmer RF 433MHz DC 12V/24V for Variety of RGB LED Lamp Light

Product Description

• *RF 433MHZ
• *DIMMER
• *RGB CONTROLLER
• *WIRELESS INTUITIVE TOUCH REMOTE CONTROL
• *EFFECTIVE RECEIVING DISTANCE NEARLY 30M
• *EASY OPERATION, 16 MILLION COLORS CHANGING
• *INDICATOR KEEP STEIP WITH RGB COLOR CHANGING
• *INPUT DC12V OR 24V IS OPTIONAL ACCORDING TO LED PRODUCT
• *MAX OUTPUT 216W
• *ENVIRONMENT FRIENDLY, CE, ROHS COMPLIANCE

Specification

• working temperature: -20-60degC
• supply voltage: DC12V/24V optional (please specify the required voltage on orders, DC12V is default)
• output: 3 channels
• connection mode: common anode
• frequency: 433MHZ
• external dimension: L90xW70xH25 mm
• package size: L155xW85xH75 mm
• net weight: 250g
• max output: 216W

Drawing of connections

---Switch on Obsess 7 by pushing on No.2 (see the drawing)

---Switch off Obsess 7 by pushing on No.1.

---Touching No.3 and 4, change the color saturation. Push on No.3 to increase, No.4 to decrease the color.

Push on No.4 button for seconds, the light gradually change to white balance( normal light )

---Touching No.5. you can move your finger over the color ring, to select the colors. ---Touching No.6 to brighten the light ---Touching No.7 to dim the light ---No.8 is the indicator. It will twinkle when operate the lamp, which means effective operation.  

1. Gradual Change Mode

--Under powered condition, press No.2 button, obsess 7 will be changed into gradual change mode. Touch A/B button,(show as below) you can control the speed of gradual change, A to speed, B to low down. Changing them into normal mode need to close the Obsess 7 and restart it.

2. Hopping mode:

-Under gradual change mode condition, touch No.2 button,the Obsess 7 will be changed to hopping mode. Touch A/B button can control the speed of it. A to speed, B to slowdown. Changing them to normal mode need to restart the Obsess 7.   3. Pay attention: The change of the above two presentation mode need 4 seconds.

Operation Instructions (Remote Control is Touching Button)

• Touch ON/OFF button, you can switch on/off the RGB strip.
• Slide the color ring, RGB strip will show the same color.
• Increasing color button can adjust the current color to the most vivid, decreasing color button is contrary, until pure white.
• You can adjust the brightness by dimming function, to brighten and dim the light.
• Gradual change mode: Touch on button again under monochrome mode condition, RGB strip will be changed into gradual change mode. Increasing color button will speed up the color change, decreasing color button will slowdown.
• Hopping mode: Under gradual change mode condition, touch on button, the RGB strip will be changed into hopping mode. Increasing color button will speed up the hopping, decreasing color button will slowdown.
• Under gradual change or hopping mode, touching on switch will change one to the other. Close the RGB strip and restart it if you want to enter monochrome mode.

Attentions

• 1) Input voltage of remote control must be the same as RGB strips.
• 2) Matching the color of output wiring when connecting.
• 3) When the color doesn�t match, for example, it displays blue when touching green, or displays green when touching blue, please check whether the wiring is correct. If not, exchange blue and green into their right connections.

Packing List

• 1 x Controller
• 1 x Touch Panel Remote Control
• 1 x User Manual