RGBW 4 channel controller is a multifunction controller, mainly used for control 4 channel lamps, it supports switch the mode from RGBW to RGB+W, at the same time, under each large mode, it supports switch mode from 39 kinds small mode; This controller can control RGB and RGBW lamps, users no need to purchase a variety of controller, then can achieve the effect you want, also RGBW mode can realize pure white light effect that RGB lamps and lanterns can't reach.
II. Technical parameters
● Working temperature: -20-60℃
● Supply voltage: DC 12-24V
● Ouput voltage: DC 12-24V
● Output connect way:common anode (6 line with 4 loop)
● External dimension: L76.6*W59*H22.2 mm
● Packing size:L103*W70*H43 mm
● Net weight: 0.133kg
● Gross weight: 0.152kg
● Remote control static state current: <10uA
● Maximum output current : 4*4A
● Maximum output power: 192W/12V 384W/24V
● Remote control distance: <=25M
III. Direction for use
1. Remote control instruction
This remote have 16 buttons. Unless specified, otherwise, signal light flashes for one time by each clicking. The specific keys function is as follows:
on/off key, you could turn on/off controller at any time;
Pause key. Under power on state, press the pause button, the controller will maintain the current state, the signal light will always bright, except the on/off key, all other buttons are invalid, until press the pause button again or on/off key to restart the controller to unlock the pause state, the signal light will off.
Mode increase key, the mode adds 1 by each pressing, mode table is shown in Table I and Table 2.
Mode reduce button, the mode minus 1 by each pressing. Mode table is as shown in Table1 or Table2.
Brightness increase button, in static mode, brightness series add 1 by each pressing, until up to the brightest, altogether 16 levels.
Brightness reduce button, in static mode, brightness series minus 1 by each pressing, until down to the darkest, altogether 16 levels.
Speed increase button, in dynamic mode, speed series add 1 by each pressing, until increase to the fastest, altogether 16 levels.
Speed reduce button, in dynamic mode, speed series minus 1 by each pressing, until reduce to the slowest, altogether 16 levels.
White light increase button, in RGB+W mode, brightness series of white light will add 1 by each pressing, until add to the brightest, altogether 16 levels.
White light reduce button, in RGB+W mode, brightness series of white light will minus 1 by each pressing, until reduce to the darkest, altogether 16 levels.
RGBW mode key, press this key, controller will be in the RGBW mode, in this mode, the fourth channel white light will instead of the white light of the RGB tricolor composite. As show in Table I.
RGB+W mode key, press this key, controller will be in the RGB+W mode, in this mode, the fourth channel white light and three channel RGB are independent, white light will be always on, and also you can adjust brightness separately, the specific mode is as shown in Table 2.
Scene 1: you could save the current scene by long pressing the button, the green signal light will flash for six times quickly when save the scene successfully. Each button can save a scene respectively in RGBW and RGB+W mode.
Scene 2: you could save the current scene by long pressing the button, the green signal light will flash for six times quickly when save the scene successfully. Each button can save a scene respectively in RGBW and RGB+W mode.
Scene 3: you could save the current scene by long pressing the button, the green signal light will flash for six times quickly when save the scene successfully. Each button can save a scene respectively in RGBW and RGB+W mode.
Scene 4: you could save the current scene by long pressing the button, the green signal light will flash for six times quickly when save the scene successfully. Each button can save a scene respectively in RGBW and RGB+W mode.
Table 1 RGBW Mode Table
Number Mode Number Mode
1 Red 21 Red burst flashing
2 Orange 22 Green burst flashing
3 Deep-yellow 23 Blue burst flashing
4 Yellow 24 Yellow burst flashing
5 Light-yellow 25 White burst flashing
6 Green 26 Three-color burst flashing
7 Light green 27 Three-color flashing
8 Cyan 28 Three-color jumpy changing
9 Light-blue 29 Seven-color jumpy changing
10 Sky-blue 30 Red gradually fades
11 Blue 31 Yellow gradually fades
12 Deep-blue 32 Green gradually fades
13 Blue-purple 33 Cyan-blue gradually fades
14 Purple 34 Blue gradually fades
15 Brown 35 Purple gradually fades
16 White light 36 White gradually fades
17 Ivory 37 Three-color gradually fades
18 Pink-white 38 Seven-color gradually fades
19 Yellow-white 39 Seven-color gradual changing
20 Blue-white
Table 2 RGB+W Mode Table
Number Mode Number Mode
1 Red + White light 21 Red burst flashing + White light
2 Orange + White light 22 Green burst flashing + White light
3 Deep-yellow + White light 23 Blue burst flashing + White light
4 Yellow + White light 24 Yellow burst flashing + White light
5 Light-yellow + White light 25 White burst flashing + White light
6 Green + White light 26 Three-color burst flashing + White light
7 Light green + White light 27 Three-color flashing + White light
8 Cyan + White light 28 Three-color jumpy changing + White light
9 Light-blue + White light 29 Seven-color jumpy changing + White light
10 Sky-blue + White light 30 Red gradually fades + White light
11 Blue + White light 31 Yellow gradually fades + White light
12 Deep-blue + White light 32 Green gradually fades + White light
13 Blue-purple + White light 33 Cyan-blue gradually fades + White light
14 Purple + White light 34 Blue gradually fades + White light
15 Brown + White light 35 Purple gradually fades + White light
16 White light + White light 36 White gradually fades + White light
17 Ivory + White light 37 Three-color gradually fades + White light
18 Pink-white + White light 38 Seven-color gradually fades + White light
19 Yellow-white + White light 39 Seven-color gradual changing + White light
20 Blue-white + White light
2. The instructions button operation on the controller
Match code key, controller is in normal power state, press and hold the key, at the same time press the on/off key for 3 seconds can match code, after matching code successfully, the signal light flashes for six times quickly.
The Function key, short press this key, the mode of controller addes 1, signal light flashes for one time. When the model is added to the last one, and then click it, the mode will be back to the first mode. Long press it for 3 seconds, can turn on/off the controller, signal light flashes for one time.
Specification of Power Supply
Working temperature: -10-60DegC
Input: AC 100-240V
Output: DC 24V, 5A