400cm WS2811 Dream Color Light 5050 RGB LED Strip + Wireless Remote Controller

Product Description

Specification for LED Strip

• Light Color: RGB Multicolor

  LED Quantity: 240pcs

  LED Source: 5050 SMD

  IC Model: WS2811

  Operating Voltage: DC5V

  Suitable Places: Indoor and Outdoor

  Waterproof Rating: IP65
  Product Dimension: 400cm*1.2cm*0.3cm
  Weight: 250g
  WS2811 IC Built in
  One WS2811 IC control one LED Chip
  Each LED is individually addressable, with 8 bits of green, red and blue data shifted in for 24 bit color
  IP65 Tube waterproof

  Strip can be cut one by one led chip

  Specification for the controller:

   Summarization

       Magic color controller suitable for SPI signal direct drive LED applications; With 256 * 256 * 256 level gray, length setting function and power off memory function, built-in a variety of patterns to choose, and can through the RF remote control to adjust all kinds of dynamic lighting change effect. Can be applied to light box advertising, the stage, home decoration, etc. But this controller belong to upgrade edition, can support ten different IC strip, support the strip line sequence switch function, at the same time support the maximum pixel points is 2048.

  Technical parameters

  ● working temperature: 20-60℃

  ● supply voltage: DC5-24V 

  ● external dimension: L94ΧW59ΧH25 mm

  ● packing size: L145ΧW95ΧH50 mm

  ● net weight: 126.3g

  ● gross weight: 166.8g

  ● rated power: 2.2W

  ● support the maximum pixel point: 2048

  ● output: one groups SPI signal

   

  Interface Specification

      Power input interface:

      Adopt conventional DC power socket as power input interface, input voltage is 5-24V.

      Load output interface:

     V+ connect strip positive, V- connect strip negative, DATA connect strip

                                  data port, CLK connect clock port.

  Direction for use

  1. There are eight buttons on controller panel, and every button function as follows:

  ON/OFF button, it can open or close load output ;

  Play/pause button, can play or pause led effect, convenient observation led static effect, dynamic

     model (8- 83) are effective;

   Adding button, at load close state, can adjust strip IC type,pixel point number,RGB line sequence;

   Reducing button, at load close state, can adjust strip IC type, pixel point number,RGB line sequence;

  Mode choosing button, mode add 1; at load close state, can switch IC type, pixel point number, RGB

     line sequence.

  Mode choosing button, mode minus 1; at load close state, can switch IC type, pixel point number,

     RGB line sequence.

  Speed-down button, dynamic model (8- 83) are effective, there are 100 steps in all.

  Speed up button, dynamic model (8- 83) are effective.

   

  2. There are six buttons on remote controller panel, and every button function as follows:

                ON/OFF: you can turn on or off load output at any time;

  MODE: mode button, you can choose playing or pausing mode, and observe the static effect of

         LED in pausing mode.

  S+: change speed increase button;        

          S-: Change speed slow down button, a total of 100 steps;

          B+: Program choosing button, Upward choice, a total of 83 program;

          B-: Program choosing button, down choice.

   

  3. Operating instructions:

  Connect the load wire at first, following by the power wire, presskey, close the controller, at this time, the screen shows"-POWER OFF-", presskey, screen up rank shows"Pixel Number:", down rank value means the controller current support pixel point, press  key can adjust point number;

  Presskey again, screen up rank shows"IC Type:", down rank information means the current support IC type, throughkey can choose the corresponding type.

  Presskey again, screen up rank shows"Led Sequence:", down rank information means strip RGB line sequence, because in the market, a lot of strips specification are different, some the sequence is RGB, some is RBG,GRB and so on, so this controller provide the RGB line sequence modify. Through  key can choose the corresponding RGB line sequence.

   

  4.Standard color changes as follows:

  Modes	Program instruction	Modes	Program instruction
  1	Static red	43	B/Y/C flow change forward direction
  2	Static green	44	G/B color draw curtain
  3	Static blue	45	B/Y color lower curtain
  4	Static yellow	46	Seven color wave forward direction
  5	Static purple	47	Seven color wave backward direction
  6	Static Cyan	48	Blue color trail backward direction
  7	Static white	49	Red color trail forward direction
  8	Red horse race lamp to right	50	Red color trail backward direction
  9	Red horse race lamp to left	51	Green color trail forward direction
  10	Green horse race lamp to right	52	Green color trail backward direction
  11	Green horse race lamp to left	53	Blue color trail forward direction
  12	blue horse race lamp to right	54	Yellow color trail forward direction
  13	Blue horse race lamp to left	55	Cyan color trail forward direction
  14	Red horse lower curtain	56	Purple color trail forward direction
  15	Green horse draw curtain	57	White color trail forward direction
  16	Three mix color brush forward direction	58	White color trail backward direction
  17	Three mix color horse race to brush	59	Seven color trail backward direction
  18	Three base color horse race to brush lower curtain	60	Seven color trail forward direction
  19	Three mix color horse race to brush draw curtain	61	C/R/C gradual change forward direction
  20	Seven color race to brush color forward direction	62	P/R/P gradual change forward direction
  21	Seven color race to brush color backward direction	63	P/R/P gradual change backward direction
  22	Seven color horse race to brush draw curtain	64	Y/G/Y gradual change forward direction
  23	Seven color horse race to brush lower curtain	65	Y/G/Y gradual change backward direction
  24	Three base color brush forward direction	66	C/G/C gradual change forward direction
  25	Three base color brush backward direction	67	C/G/C gradual change backward direction
  26	Three mix color brush forward direction	68	P/B/P gradual change forward direction
  27	Three mix color brush backward direction	69	P/B/P gradual change backward direction
  28	Seven color brush backward direction	70	C/B/C gradual change forward direction
  29	Seven color brush forward direction	71	C/B/C gradual change backward direction
  30	Three base color brush draw curtain	72	W/R/W gradual change forward direction
  31	Three base color brush lower curtain	73	W/R/W gradual change backward direction
  32	Seven color brush draw curtain	74	G/R/G gradual change forward direction
  33	Seven color brush lower curtain	75	G/R/G gradual change backward direction
  34	Three base color flash	76	Y/R/Y gradual change forward direction
  35	Seven color flash	77	Y/R/Y gradual change backward direction
  36	Three base color jumpy change	78	R/Y/R gradual change
  37	Three mix color jumpy change	79	R/P/R gradual change
  38	Seven color jumpy change	80	G/C/G gradual change
  39	G/B/Y flow change forward direction	81	G/Y/G gradual change
  40	B/Y/C flow change backward direction	82	B/P/B gradual change
  41	Three mix color flow change forward direction	83	Auto play 1-82
  42	Three mix color flow change backward direction

     5. Controller support strip IC type as follow:

  No.	Model	Signal line
  1	LPD6803	DATA、CLK
  2	TM1803	DATA
  3	UCS1903	DATA
  4	WS2811	DATA
  5	TM1812	DATA
  6	TM1809	DATA
  7	WS2801	DATA、CLK
  8	TLS3001	DATA
  9	TLS3008	DATA
  10	P9813	DATA、CLK
  11	LPD8806	DATA、CLK

   

  If the strip have 2 signal line, then need to connect the ground line, clock line, data line with controller V-、CLK、DATA; if the strip have 1 signal line, then need to connect the ground line, data line with controller V-、DATA is OK.

  Note: If the Strip V+ port voltage is the same with controller input voltage, then you can direct connect it with controller V+ port, if it is different, then need to connect to other power supply.

Packing List

• 1 x 400cm RGB Flash Dream-Color LED Strip WS2811
• 1 x WS2811 Controller
•