3528 5050 Single Color LED Strip Light Touch Panel Dimmer 2 Channel DC 12V-24V

Product Description

On touch panel,there are total 9 key and 1 brighness ring.

I key：trun on/off controller at any state

A key：choose mode.Total 3 modes can be choose cyclically.

B key：slow dynamic mode’s speed down, 100 grade of speed.You can press it continuously .The key will be not useful until reach the slowest speed.

C key：accelerate dynamic mode’s speed up  100 grade of speed. You can press it continuously .The key will be not useful until reach the slowest speed.

D key：delay shutdown.After pressing this key ,light will stop work 2 minutes later.Before light shundown, press any key or brighness ring will let delaying shutdown fail.

E key：output 25% brightness.Press this key at dynamic mode,mode will be changed to static output.It is unuseful to press this key when shutdown.

F key：output 50% brightness.Press this key at dynamic mode,mode will be changed to static output.It is unuseful to press this key when shutdown.

G key：output 75% brightness.Press this key at dynamic mode,mode will be changed to static output.It is unuseful to press this key when shutdown

H key：output 100% brightness.Press this key at dynamic mode,mode will be changed to static output.It is unuseful to press this key when shutdown

Brighness Ring:Touch this ring at any state,mode will be changed to static output.

Remarks

• 1. Connect the load wire at first, following connect the power wire; Before power on,pls  make sure all wire were connected correctly and no short circuit. 
  2.The range of supply voltage is DC12V~DC24V.Controller may be burned out once exceed the voltage ranges.
  3.For the panel is made of glass,pls gently install it. 
  4.Never overload.

Packing List

• 1x Touch Panel Dimmer
• 1x Manual
•